Automatic Roatry Laser Chuck Main Chuck For Pipe Cutting Machine
1.Descripition
The product is specially designed for laser pipe cutter. The product itself can be used as an independent spindle with a chuck in the middle which can firmly clamp the work-piece and rotate at the same time. With the built-in two independent cylinders, one-way valve and check valve, it has long-term pressure-holding function( more than 8 hours), rapid clamping and loosening action can be achieved through the side rotation of air inlet, and disconnect the air source to start the work.
Because of the long length of the parts processed by the cutter, the main chuck used as the head position of laser cutting and the tail chuck matched with it are usually installed in pairs on the equipment. The product is stable in structure and can withstand large radial force, axial force and overturning force. It has smooth rotation, high accuracy and low noise.
The product is a four-claw dual-power automatic, in order to keep the using environment clean and sanitary, the series of products can install the dust extraction device on the back, and are recommend for installation in the pipe cutter.
2.Performance Parameters
| | G360B-110 |
| | 50mm |
| | 0.8KN |
| | 0.4-0.9MPa |
| | 400r/min |
| | 5-110mm |
| | 225mm |
| | 2.19Kg.m2 |
| | 107kg |
| | 149kg |
3.Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S |
| G360B-110 | 420 | 225 | 405 | 427 | 230 | 186 | 365 | 211 | 110 | 122 | 140 | 360 | 30 | 60 | 8 | 6 | 22 | M12 | 12-M8 | 18 |
4.Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5.Production Line
